Leprechaun Bottoms Up Tutorial

 

Leprechaun Bottom Up Tutorial 

You need to download or purchase the following items below

Lucky Charm St Patrick Kit HERE (pay)

Tag Template HERE (download)

Tube Luneth by Goldwasser HERE (pay)

1. Open Luneth go to Windows>Duplicate close the original out then design her into the green outfit as I did above. Then go to Layers>Merge>Merge Visible go to Edit>Copy then go to Edit>Paste into Image then go to Windows>Duplicate 

Take one of the Image go to Image>Resize height 400 pixels click okay the other tube just mini size it we will use it later in the tutorial. Hold on top the tube we just size 

2. Open Tag Template go to Windows>Duplicate close the original out then go to the CC layer right click your mouse go to delete click yes and it remove the copyright to my tag template if you can't open the psp image build it with the png templates but you should be able to open it from psp x7 to 23 program 

3. Take the tube we create in the height of 400 pixel go to Edit>Copy now go to the top of the tag templates go to Edit>Paste into new raster layer move it on top of the clover on the right side once in place close the tube off we will open her later lets decorate the tag template 

4. Open Paper 10 add it to your foreground pattern 45 angle, 25 scale click okay now go to the template of the following below 

F1, and F3 

Go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the strip paper into the marching ants then go to Selections>Select None  do this to both templates close the paper out 

5. Open Paper 3 add it to your foreground pattern 45 angle, 50 scale click okay then go down to T1 add it to the template close the paper

6. Open Paper 5 add it to your foreground pattern 0 angle, 50 scale click okay then go to down to F2 add the paper keep the marching ants go to 3d Effects>Drop Shadow of 2 2 50 2 black click okay then again at -2 -2 50 2 black click okay then go to Selections>Select None close the paper 

7. Open Paper 4 add it to your foreground pattern 45 angle, 25 scale go down to the BGC add it to the green clover templates close the paper

8. Open Paper 1 add it to your foreground pattern 45 angle, 25 scale go down to the Lines add it to the template then close the paper

9. Open Paper 8 add it to your foreground pattern 0 angle, 100 scale go down to F4 add it then add the same drop shadow as did in step 6

10. Add this solid green color #84ca30 into the foreground color and add this pink color into the background color #f0386c then go to the clover 1 go to Selections>Select all>Float then go to Layers>Add new raster click on the paint can and paint the green into 2 of the clover then switch the foreground and background and color pink in the corner clover then go to blend change to overlay go to Selections>Select None

11. Keep the pink into the foreground go to Clover 2 do step 10 but use the pink change it to overlay then Selections>Select None

12. Go to the WA go to Layers>Duplicate, Image>Mirror then with your move tool move the white word art over to the right side a little bit 

13. Go to the mini size tube go to Image>Resize 400 height click okay now go to Edit>Copy now go down to the green square paper go to Edit>Paste into new raster layer with your move tool move her down into the green paper once in place go to the green paper go to Selections>Select all>Float then go to Selections>Invert then go to the tube go to Edit>Cut then go to Selections>Select None then go to the tube change it to luminance (L) 

14. Go to the top of the tag templates open Luneth tube add the drop shadow of 0 0 60 25 black click okay 

15. Open Pot of Gold Image>Resize 35% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool move the pot of gold down on the left side of the corner as shown above

16. Open Grass 1 go to Image>Resize 55% then go to Edit>Copy now go down beneath the tube and the element go to Edit>Paste into new raster layer with your move tool place the green clover grass down beneath the tube and the pot of gold 

17. Open Grass 2 go to Image>Resize 60% then go to Edit>Copy now go down beneath the grass 1 go to Edit>Paste into new raster layer with your move tool place the grass beneath the clover grass as shown above 

18. Open Horseshoe 2 go to Image>Resize 25% then go to Image>Free Rotate Right 25 click okay then go to Image>Flip Vertical then go to Edit>Copy then go to the top image layers go to Edit>Paste into new raster layer with your move tool place it on the top left corner of the clover paper then take your eraser and erase the horseshoe on the gold line top (if you have problems doing this there a bonus element in the folder, want to teach ppl how to create the design I create to share a teaching tips)

19. Open Harp 2 go to Image>Resize 60% then go to Edit>Copy now go down beneath the tube go to Edit>Paste into new raster layer with your move tool place the harp behind the girl 

20. Move clover 1 overlay above the harp , then move the color clover layer above the overlay of the harp 

21. Go to Layers>Merge>Merge Visible 

22. Add copyright as shown below but TA_add your name not mine 

23. Add your name if you like , Like I did mine below 

Font Anime

Color white 

Add drop shadow to my name as 0 0 60 25 black click okay 

24. Go to Layers>Merge>Merge Visible 

25. Go to File save as PNG Format 

This completes this tutorial thank you for purchasing our designs and look for other tutorials under the St Patrick's with this St Patrick kit of lucky charm I title both Lucky Charm and St Patrick kit all of 2026 is made with this kit design thanks for stopping by look for new tutorials and creations to come soon 

Hugs Sunshine

written March 7th, 2026 

Shamrock Rock Tutorial

 

Shamrock Rock Tutorial 

You need to download or purchase the items below

Lucky Charm Kit HERE (pay)

Tag Template HERE (download)

Tube Samara HERE by Goldwasser (pay)

1. Open the tag template psp image go to Windows>Duplicate close the original out then go to the CC right click your mouse click delete click yes it remove the copyright. If you can't open the psp image build together with the png templates but you should be able to open it from psp x 7 to 23 program 

2. Open Paper 7 add it to your foreground pattern 45 angle, 25 scale click okay now go down to C1 go to Selections>Select all>Float go to Layers>Add new raster layer click on your paint can and paint the green strip paper into new raster layer then go to Selections>Select None

3. Open Paper 8 add it to your foreground pattern 0 angle, 100 scale click okay then go to C2 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the green gradient paper into the marching ants (keep them going) go to your 3d Effects>Drop Shadow of 2 2 50 2 black click okay then again at -2 -2 50 2 black click okay then go to Selections>Select None (keep paper open)

4. Open the Shamrock Mist go to Edit>Copy now go to the green paper circle go to Edit>Paste into new raster layer with your move tool place it into the center of the green paper (if it doesn't fall into place) go to the blend change to hard light 

*Mist was made by Elf tubes paper which download HERE (want the Lucky Irish Kit) 

5. Use Paper 8 with both top and bottom white template do step 3 again  then you can close the paper

6. Open Paper 3 add it to your foreground pattern 45 angle, 50 scale click okay then go to T1 go to Selections>Select all>Float then go to Layers>Add new raster layer click on your paint can and paint the clover paper into the marching ants then go to Selections>Select None

7. Add this green solid color #80b701 into your foreground color then go down to the Clover 1 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the green color into the marching ants then go to blend change to overlay then go to Selections>Select None

8. Add this gold solid color #ecd56d into your foreground color do step 7 but with Clover 2 

9. Go to the WA go to Image>Negative then go to your 3d Effects>Drop Shadow of 0 0 60 25 black click okay 

10. Open tube Samara design her into her green design for St Patrick as I did above then go to Layers>Merge>Merge Visible go to Edit>Copy then go to Edit>Paste into Image then close the other image out click no goes back to its regular settings then go to the image tube go to Image>Resize 500 height pixels click okay then go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place her down on the left side of the circle once in place go to your 3d Effects>Drop Shadow of 0 0 60 25 black click okay 

11. Open Pot of Gold 2 (or 1 I use 2) go to Image>Resize 30% then go to Edit>Copy go down beneath the tube go to Edit>Paste into new raster layer with your move tool place the pot of gold down by the girl on the right side it will line with the gold clover on the bottom 

12. Open Coins go to Image>Resize 55% then go to Edit>Copy then go down beneath the pot of gold go to Edit>Paste into new raster layer with your move tool slide the coins under the legs of the girl 

13. Open Grass 2 go to Image>Resize 60% then go to Edit>Copy now go down beneath the coins go to Edit>Paste into new raster layer with your move tool move the grass down beneath the tube and the elements 

14. Open Grass 1 go to Image>Resize 45% then go to Edit>Copy now go down to the grass 2 go to Edit>Paste into new raster layer with your move tool move the clover grass down on top of the grass just on the top not the bottom 

15. Open Clover Puppy 1 go to Image>Resize 25% now go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the gold clover puppy on top of the girl as shown above

16. Open Clover Puppy 3 go to Image>Resize 25% now go to Image>Mirror then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the white clover puppy on the left side of the pot of gold as shown above give it the same drop shadow 

17. Open Horseshoe go to Image>Resize 25% then go to Image>Free Rotate left 25 click okay then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the horseshow down on the bottom lower corner of right side once in place go to Layers>Duplicate, Image>Flip Vertical then move the duplicate horseshoe on the upper right corner then take your eraser and erase the horseshoe on the top and bottom of the horseshoe if you can erase it right way (you can use the 2 elements provide in the folder) 

18. Open St Paddy Mouse 1 or 2 I use 1 go to Image>Resize 25% then go to Image>Mirror then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool move the mouse on the right side of the pot of gold as shown above

19. Go to Layers>Merge>Merge Visible

20. Add copyright as show below add TA_your name not  mine

21. Add your name if you wish I use the following below

Font Anime

Color white 

22. Go to Layers>Merge>Merge Visible

23. Go to File save as PNG Format 

This completes this tutorial thank your for purchasing the designs and look for other tutorials with this kit under the St Patrick's tutorials thanks for stopping by have a good day xoxo 

Hugs Sunshine

written March 7th, 2026 

Got A Irish Attitude Tutorial

 

Got A Irish Attitude Tutorial 

You need to download or purchase the items below

Lucky Charm Kit HERE (pay)
Tag Template HERE (download)

Tube Liselotte HERE by Goldwasser (pay)

1. Open tag template go to Windows>Duplicate close the original out then go to the CC right click mouse go to delete click yes this remove the copyright of my tag. If you can not open the psp image build with the png templates like the sample tag but you should be able to open it from psp x7 to 23 program 

2. Open Tube design her as I did above then go to Layers>Merge>Merge Visible go to Edit>Copy and then go to Edit>Paste into Image then close the original out click no goes back to it original settings then go to the tube of Liselotte go to Windows>Duplicate it, mini size both tubes we get back to them in a little while

3. Open Paper 10 go to your foreground pattern go to 45 angle, 25 scale click okay now go down to T1 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the stripe paper into the marching ants then go to Selections>Select None close the paper we done with it

4. Open Paper 7 add it to your foreground pattern 0 angle, 50 scale then go to T2 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the green stripe paper into the marching ants (keep the ants going) go to your 3d Effects>Drop Shadow of 2 2 50 2 black click okay then again at -2 -2 50 2 black click okay then go to Selections>Select None close the paper

5. Open Paper 5 add to your foreground pattern 45 angle, 25 scale click okay now go template C1 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the pink stripe paper into the marching ants then go to Selections>Select None close the paper out 

6. Open Paper 8 add to your foreground pattern 0 angle, 100 scale go to C2 add it give it the same drop shadow as before with leaving the marching ants going as you did in step 4

7. Add this solid green color #84ca30 into the foreground color go to Clover 2 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the green color into the new raster layer of the marching ants of the clover then go to blend change to overlay then go to Selections>Select none 

8. Move the green color into your background color then add this pink color #84ca30 into foreground color then go to Clover 1 go to Selections>Select all>Float then go to Layers>Add new raster layer click the paint can and paint the 2 small clover in pink then move the green to the foreground then paint the big clover into the green then go to blend change to overlay then go to Selections>Select None

9. Open tube go to Image>Resize 550 height pixels click okay now go to Edit>Copy now go down to the circle green gradient paper go to Edit>Paste into new raster layer with your move tool place her into the circle once in place go to the green circle paper go to Selections>Select all>Float then go to Selections>Invert then go to Liselotte tube go to Edit>Cut then go to Selections>Select None then go to the tube go to blend change to luminance (L) 

10. Go to the WA go to Layers>Duplicate, Image>Negative move just a hair over to the right then go to the white word art go to Layers>Duplicate to brighten the word art 

11. Go to the 2nd tube of Liselotte go to Image>Resize width 400 pixels click okay now go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place her on the left side as shown above now once in place go to your 3d Effects>Drop Shadow of 0 0 60 25 black click okay (give it depth)

12. Open Whiskey jug 1 go to Image>Resize 35% then go to Edit>Copy then go to the top image layers go to Edit>Paste into new raster layer with your move tool place it on the right side of the bottom frame 

13. Open 3 Champage glasses go to Image>Resize 20% then go to 70% then go to the following below

Pink Glass go to Edit>Copy then go to top image layers go to Edit>Paste into new raster layer with your move tool place the pink glass by her leg and then go to Layers>Duplicate move by the whiskey jug as shown above

Green Glass go to add by the right side of the whiskey jug

Gold Glass add it to the right side of the jug then go to Layers>Duplicate move the duplicate gold glass on the left side of the jug as shown above

14. Open Candy bag 2 go to Image>Resize 20% then 80% then go to Edit>Copy now go down beneath the gold glass go to Edit>Paste into new raster layer with your move tool move the candy bag down behind the gold glass by the jug as shown above

15. Open Candy bag 1 go to Image>Resize 70% then again at 20% then go to Edit>Copy go to the images go to Edit>Paste into new raster layer with your move tool move the gold candy bag by the green candy bag 

16. Open Cake 1 go to Image>Resize 20% now go to Edit>Copy now go to your images go to Edit>Paste into new raster layer with your move tool place the cake in front of the jug as shown above

17. Open Cupcake 2 go to Image>Resize 10% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the cupcake next to the pink glass by her leg as shown above

18. Open Grass 2 go to Image>Resize 60% then go to Edit>Copy now go down to the clover go to Edit>Paste into new raster layer with your move tool move the grass down beneath the tube then once in place go to Layers>Duplicate, Image>Mirror adjust on the right side 

19. Open Grass 1 go to Image>Resize 55% then go to Edit>Copy now go above both grass of 2 then go to Edit>Paste into new raster layer with your move tool move the clover grass down on the right side then go to Layers>Duplicate, Image>Mirror

20. Go to the white word art 2nd copy with your mouse move it all the way up to the top so the Attitude shows above the elements as shown above

21. Now use the push tool and your move tool (this is optional) go to each element move up a little including the tube of Liselotte (it blends it as if it is sitting in the grass) 

22. Open Saint Dog 2 go to Image>Mirror then go to Image>Resize 25% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the dog in front of her shoe as shown above

23. Open Saint Dog 1 go to Image>Resize 70% then again at 25% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the dog on the left side of her knee once in place use the push tool up a little on the dog feet (optional)

24. Open Clover Corner 2 go to Image>Mirror then go to Edit>Copy then go to the top image layers go to Edit>Paste into new raster layer with your move tool place the corner 2 on top of the left top frame then go to Layers>Duplicate, Image>Mirror then move the duplicate on top of the whiskey jug 

25. Open Clover Corner 1 go to Edit>Copy then go to the top image layers go to Edit>Paste into new raster layer with your move tool place the corner 1 on top of the upper right frame as shown above

26. Add copyright as shown below add TA_your name not  mine 

27. Add your name if you wish as I did the following below

Font Anime

Color black then once I add it I went to Layers>Duplicate, then Image>Negative turn it white move it over a little to the right 

28. Go to Layers>Merge>Merge Visible 

29. Go to File save as PNG Format 

This completes this tutorial thank you for purchasing our designs look for other tutorials with my Lucky charm St Patrick kit under St Patricks tutorials thanks for stopping by have a awesome evening 

Hugs Sunshine

written March 7th, 2026 

Kiss Me I'm Irish Tutorial

 

Kiss Me I'm Irish Tutorial 

You need to purchase or download the following items

St Patrick Kit HERE (pay)

Tag Template HERE (download)

Tube  Amber   by Goldwasser HERE (pay) 

1. Open the tag template go to Windows>Duplicate close the original go to the CC right click your mouse to go to delete click yes it remove my copyright for the tag template. You should be able to open the psp image between psp x7 to 23 if can't open it you can build it into layers with the png template as the sample page shows 

2. Open Amber make her into outfit St Patrick when get to the gloves use Hue at 86 and Saturation 129 click okay it turn to green once please with how you have her dress or as I do above go to Layers>Merge>Merge Visible go to Edit>Copy then go to Edit>Paste into Image close the original file out click no stays in its original settings then mini size her we add her in a little white 

3. Open Paper 10 add it to your foreground pattern 45 angle, 25 scale click okay now go to the following templates below 

T1, F1, and F3

Go to Selections>Select all>Float then go to Layers>Add new raster layer click on your paint can and paint the strip paper into the marching ants of your new raster layer then go to Selections>Select None close the paper once you done coloring 3 templates layers

4. Add this solid orange color #f4c04c go to both templates F2, and F4 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the orange color into the new raster layer of the marching ants (keep the marching ants going) go to your 3d Effects>Drop Shadow of 2 2 50 2 black click okay then go to -2 -2 50 2 black click okay then go to Selections>Select None

5. Add this solid pink color #f0386c go to L1, and L2 and color your lips once you color go to the blend change to overlay 

6. Add this solid green color #84ca30 go to C1, C2, C3 of your clovers go once you color go to the blend each layer go to Overlay 

7. Open Paper 8 add it your foreground pattern 0 angle, 100 scale click okay go down go the template T2 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the green gradient paper into the marching ants (keep the marching ants going) go to your 3d Effects>Drop Shadow of 2 2 50 2 black click okay then again at -2 -2 50 2 black click okay then go to Selections>Select None

8. Go to Amber go to Windows>Duplicate, mini size one take one go to Image>Resize height 550 pixels click okay go to Edit>Copy go down the green paper layer go to Edit>Paste into new raster layer adjust her as you want into the green paper once down go to the green paper go to Selections>Select all>Float then go to Selections>Invert go to to Amber layer go to Edit>Cut remove her parts outside of the green paper go to Selections>Select None go to Amber go to blend change to Luminance (L) 

9. Open Amber 2 go to Image>Resize 500 height pixels click okay now go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool adjust her as I have above once done adding her 

10. Open Grass 1 go to Image>Resize 55% then go to Edit>Copy now go down beneath your tube go to Edit>Paste into new raster layer with your move tool adjust the clover grass beneath her go to Layers>Duplicate, move the duplicate grass down (line with the frame) now go to Layers>Duplicate go down below the frame with her foot

11. Open Grass 2 go to Image>Resize 60% now go to Edit>Copy now when you go to Edit>Paste into new raster layer you going to go beneath grass element 1, 2, 3 adjust it into the image as I did (or you can use open the grass element in the tutorial I provide for this tutorial) 

12. Open Harp go to Image>Resize 60% then go to Image>Mirror go to Edit>Copy go down beneath Amber go to Edit>Paste into new raster layer with your move tool place the harp in the back of her as shown above 

13. Open Pot of Gold 1 go to Image>Resize 35% then go to Edit>Copy then go to Edit>Paste into new raster layer move the pot of gold down on the image as shown above 

14. Open Horseshoe 2 go to Image>Resize 25% then go to Image>Free Rotate Right 25 click okay now go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the horseshoe on top of the pot of gold it will fit into place 

15. Open Mushroom 1 go to Image>Resize 35% now go to Edit>Copy go to your image go to Edit>Paste into new raster layer move the 1st mushroom over on the right side of the clover grass once in place go to your push tool move up a hair then go to Layers>Duplicate, Image>Mirror adjust the 2nd mushroom on the luminance of Amber leg then go to Layers>Duplicate with the 3rd mushroom move it above Amber adjust into the clover grass the mushroom be on the gold pot of gold as shown above

16. Open Mushroom Home 1 go to Image>Resize 45% then go to Edit>Copy now go down the green paper go to Edit>Paste into new raster layer with your move tool move the mushroom on top of her of her back once in place take your eraser and erase the mushroom that over laps on Amber (keep the element open)

17. Go to the element go to Image>Mirror go to Edit>Copy go down to the green paper layer go to Edit>Paste into new raster layer with your move tool adjust the mushroom again on the right side as shown above once in place take your eraser and erase the mushroom on her then take the eraser and erase the gray hand on Amber 

18. Open Clover Puppy 3 go to Image>Resize 25% go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place him in front of the mushrooms as shown above

19. Open Clover Puppy 1 do same setting in 18 add him down on top of the her leg left side 

20. Open Clover Puppy 2 go to Image>Mirror go to Image>Resize 25% then add him down to the lower right frame as shown above

21. Go to all 3 Puppy's go to 3d Effects>Drop Shadow of 0 0 60 25 black click okay do Amber too 

22. Open Rainbow 2 go to Image>Resize 60% now go to Edit>Copy now go down to the green paper go to Edit>Paste into new raster layer with your move tool place it on top of the right side hide the right cloud beneath the frame as shown above

23. Go down to the pink lip bottom frame move it a little up and move the overlay template up too 

24. Go to Layers>Merge>Merge Visible

25. Add the copyright as shown below but put TA_your name not mine 

26. Add your name if you like I use the following below

Font Beach Crab

Color #000000

27. Go to Layers>Merge>Merge Visible 

28. Go to File save as PNG Format 

This completes this tutorial thank you for purchasing my kit and make sure to give Kim thank you for her lovely tube for this tutorial .. look for other tutorials under St Patrick's with this scrap kit of mine thanks for stopping by may you have awesome day 

Hugs Sunshine

written March 7th, 2026 

Rub my Shamrock for Luck Tutorial

 

Rub my Shamrock for Luck Tutorial

You need to download or purchase the items below

St Patrick Kit HERE (pay)

Tag Template HERE (download)

Tube Gerda HERE (pay by Goldwasser)

1. Open Gerda make her all green when you get the her panties and shocking go to the white go to Hue at 106 and Saturation at 88 click okay it will change to green add coins into her hand and had the pink pillow once please go to Layers>Merge Visible go to Edit>Copy Edit>Paste into Image close the original click no. Mini size her we get back to her in the tutorial soon

2. Open the tag template psp image go to Windows>Duplicate close the original go to CC right click mouse go to delete click yes it remove my copyright for the tag template. You should be able to open psp image from psp x7 to 23 if not build it with the png templates into layer as it shows with the sample page

3. Open Paper 4 add it to your foreground pattern 45 angle, 50 scale click okay now go to green clover template BGC go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the clover paper into the two templates then go to Selections>Select None close the paper

4. Open Paper 3 add to your foreground pattern same setting add it template of C1, and FW 1 

5. Open Paper 9 add it to your foreground pattern 0 angle , 50 scale then add it to your C2 then keep marching ants going afterwards go to your 3d Effects>Drop Shadow of 2 2 50 2 black click okay then again at -2 -2 50 2 black click okay then go to Selections>Select None close the paper

6. Open Paper 5 add to your foreground pattern 0 angle, 25 scale add it to template Stripes once done go to Selections>Select none close the paper 

7. Open Paper 7 add to your foreground pattern 0 angle, 50 scale add it to your FW 2 keep marching ants going add the same drop shadow as before both times then go to Selections>Select None close the paper 

8. Add this solid green color #84ca30 into your foreground color then go to Clover 2 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the solid green color into the new raster layer go to your blend change to overlay go to Selections>Select None move the solid green into your background color (we want to keep the green)

9. Add this pink #c42d58 into the foreground pattern go to Clover 1 color big clover pink and the small color green switch the foreground and background around and make sure to go to blend change to overlay after you color both the pink and green as did in step 8

10. Go to the WA go to Layers>Duplicate, Image>Negative then with your move tool move the white WA over to the right side giving it an 3d view look 

11. Open Gerda tube go to Image>Resize 350 width pixels click okay now go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place her on the right frame once in place go to Layers>Duplicate go to Image>Mirror adjust her on the left frame (we going to have twin girls in this tutorial) 

12. Merge both Gerda layers together simple top one go to Layers>Merge>Merge Down then go to your 3d Effects>Drop Shadow of 0 0 60 25 black click okay 

13. Open Pot of Gold 2 (or your choice) go to Image>Resize 35% now go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the pot of gold between the two girls 

14. Open Coins 1 go to Image>Resize 35% now go to Edit>Copy go to Gerda tube layer go to Edit>Paste into new raster layer with your move tool adjust the coins on her leg on the left side then go to Layers>Duplicate, Image>Mirror adjust on the right side then go to Coins 1 top coins go to Layers>Merge>Merge Down then move the coins down below Gerda 

15. Open Rainbow 1 go to Image>Resize 45% now go to Edit>Copy now close of Gerda go beneath her go to Edit>Paste into new raster layer with your move tool place the rainbow on the right side of the frame want the clover line on the small green clover edge of the right frame then once in place go to Layers>Duplicate, Image Mirror if need adjust the left side of the rainbow 

16. Open Grass 1 go to Image>Resize 55% then go to Edit>Copy now go down beneath the coins I went to the Clover go to Edit>Paste into new raster layer with your move tool place the clover grass down on the left side slide little under the coins once in place go to Layers>Duplicate, Image>Mirror adjust on the right side if need

17. Open Grass 2 do step 16 but go beneath both grass of 1 

18. Re open twins of Gerda 

19. Open St Paddy Mouse 4 go to Image>Resize 25% then go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place the mouse in the Leprechaun hat on the left side once in place go to your 3d Effects>Drop Shadow of 0 0 60 25 black click okay 

20. Open St Paddy Mouse 2 go to Image>Resize 25% then go to Image>Mirror add the mouse to the right side add the same drop shadow as before 

21. Open Clover Puppy 3 (or your choice) go to Image>Resize 25% then add it to your tag and add the same drop shadow again

22. Open Lollypop Clover 2 (or 1 I use 2) go to Image>Resize 20% then go to Image>Free Rotate left 25 click okay now go to Edit>Copy then go to Edit>Paste into new raster layer with your move tool place it into the left side hand take your small eraser and tap it on the third finger, make it look like she holding it, then go to Layers>Duplicate, Image>Mirror and place it into her right side line the missing stick on the 3rd finger (if you have troubles there a element in the folder for you use)

23. Go to the top image layers go to Layers>Merge>Merge Visible

24. Add copyright as shown below but put TA_your name not mine 

25. Add name if you like I did the following below

Font Anjelika Rose

Color #ffffff

I add drop shadow of 0 0 60 25 black to my name (it gives depth) as I add my name to the pot of gold as shown above 

26. Go to Layers>Merge>Merge Visible 

27. Go to File save as PNG Format 

This completes this tutorial thank you for stopping by and thank you for purchasing my kit and Kim tube make sure to give thanks to her, if you use a different tube then that is your choice look for other tutorials with my st patrick lucky charm kit under St Patricks may you have a great weekend look for more tutorials to come soon 

Hugs Sunshine

written March 7th, 2026 

Luck of the Irish Tutorial

 

Luck of the Irish Tutorial 

You need to purchase or download the items below

St Patrick Kit HERE (pay)

Tag Template HERE (download)

Tube Tenebria HERE (pay) by Golwasser 

1. Open Tube go to Windows>Duplicate 3 times make one of her with the St Patrick hat, pot of gold her in the green dress. Then make 1 of her with the blue dress, and 1 with her with the red dress or your choice you want to extra tubes of her for the head shots.. (set them aside we will get back the tubes of her in the tutorial soon)

2. Open tag template go to Windows>Duplicate close the original out then go to the CC right click your mouse click delete click yes it will remove my copyright for the tag template. If you can not open the psp image you can build it together with the png templates. You should be able open from psp x7 to 23 program 

3. Open Paper 4 go to your foreground patterns 45 angle, 50 scale click okay now go down to the BGC template go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the clover paper into the marching ants on your new raster layer once done go to Selections>Select None close the paper out 

4. Open Paper 3 do step 3 again but with T1 

5. Open Paper 8 go to Foreground pattern 0 angle, 100 scale click okay go to FW template go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the green gradient into each marching ants then  (keep the marching ants) go to your 3d Effects>Drop Shadow of 2 2 50 2 black click okay then again at -2 -2 50 2 black click okay then go to Layers>Add new raster layer (close the paper out ) go to step 6

6. Locate the Blue dress tube of Tenebria go to Image>Resize width 350 pixels click okay now go to Edit>Copy now go to Edit>Paste into new raster layer with your move tool adjust her into the left frame once in place go to Selections>Invert go to her tube layer go to Edit>Cut then go to Selections>Select None now go to her tube go to Layers>Duplicate, Image>Mirror it will place her into the right side 

7. Go to the left tube of her change blend to Luminance (L) 

8. Go to the 3 frame paper of the green go to Selections>Select all>Float

9. Go to the Red dress of her tube do step 6 again but add her to the middle frame 

10. Add this solid green color #69bc2e into the foreground colors go to Clover 1 and 2 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the green solid color into the new raster layer go to the blend change to overlay then go to Selections>Select none 

11. Add this sold gold color #edd775 do step 10 but to your pearls 

12. Go to the WA move it over to the left side with your move tool center (optional)

13. Locate tube with the St Patrick outfit go to Image>Resize 450 width pixels click okay now go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place her on the left side as shown above 

14. Open Harp 1 or 2 I use 2 but it really matter which one you use lol go to Image>Resize 60% then go to Image>Mirror then go to Edit>Copy now go down beneath the St Patrick tube of Tenebria go to Edit>Paste into new raster layer slide the harp behind her the pole line up with her body 

15. Open Leprechaun bag 1 go to Image>Resize 35% go to Edit>Copy now go to the top of the image layers go to Edit>Paste into new raster layer with your move tool move the bag on the right corner as shown above

16. Open St Paddy Mouse 2 (or 1 I use 2) go to Image>Mirror then go to Image>Resize 25% now go to Edit>Copy go to the top of the image layers go to Edit>Paste into new raster layer with your move tool place the mouse on top of the Leprechaun bag towards the left side of the bag once in place go to Layers>Duplicate, Image>Mirror and adjust the duplicate mouse on her dress by the harp as shown above

17.Open the Grass 1 go to Image>Resize 55% then go to Edit>Copy go down beneath the harp element go to Edit>Paste into new raster layer with your move tool place the grass clover under the girl once in place go to Layers>Duplicate with your move tool move the grass over to the right side then go to Image>Flip Vertical with the grass make go upside down then adjust it on the right side as the grass line with the clover frame 

18. Open Grass 2 go to Image>Resize 55% then go to Image>Flip Vertical go to Edit>Copy now go to the upside down grass go beneath it then go to Edit>Paste into new raster layer with your move tool place the grass 2 beneath grass 1 on the right side blend the grass together

19. Open Doodle go to Edit>Copy go down beneath Tenebria tube of St Patrick go to Edit>Paste into new raster layer with your move tool adjust the doodle with the clover on the frame then once please go to Layers>Duplicate move the doodle over again giving flowers in the grass 

20. Open Champagne glass 3 (or your choice) go to Image>Resize 25% then again at 80% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool move the glass next to her as shown above once in place go to Layers>Duplicate move the second glass a little down (as if she waiting on someone show up lol) 

21. Open Cupcake 2 (or your choice) go to Image>Resize 20% then again at 70% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer place the cupcake in front of the glasses as shown above

22. Open Clover Puppy 3 (or your choice) go to Image>Resize 25% now go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the puppy on her knees as shown above

23. Go to Layers>Merge>Merge Visible

24. Add copyright as shown below but put TA_ your name not mine 

25. Add your name if you like as I use the following below

Font Anime

Color Foreground #edd775 and background white 

I lay my name into the grass then add 3d Effects>Drop Shadow of 0 0 60 25 black click okay do it 2 times it give depth as your name is laying in the grass 

26. Go to Layers>Merge>Merge Visible

27. Go to File save as PNG Format 

This completes this tutorial thank you for purchasing the designs you can use the tube I use or whatever tube you want make sure to give thanks to Kim if you use her tube. Look for other tutorials with this scrap kit under St Patricks designs thanks for stopping by may you have a great weekend 

Hugs Sunshine

written March 7th, 2026 

Lucky Charm Tutorial

 

Lucky Charm Tutorial 

You need to purchase or download the items below

St Patrick Kit HERE (pay)

Tag Template HERE (download)

Tube Joan HERE (pay) by Misticheskaya 

1. Open the tag template go to Windows>Duplicate close the original out then go to the CC right click your mouse delete it close the original template out if you can't open the psp image you can build it into layers with the png templates but it should open from psp x 7 to 23 program

2. Open Joan design her as you want as I did above.. in her clover outfit. go to the rainbow go to Edit>Copy then go to Edit>Paste into Image (we use the rainbow in the tutorial) then close it and once you have Joan design with the puppy and clovers go to Layers>Merge>Merge Visible then go to Edit>Copy then go to Edit>Paste into Image (we create the tube we going to use in the tutorial) close the original tube out click no 

Mini size both Joan and the Rainbow we get to them in the tutorial soon 

3. Open Paper 3 add it into your foreground pattern 45 angle, 25 scale click okay now go to the following templates below

T1, C1 

Go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the clover paper into the marching ants of the new raster layer click Selections>Select None do both templates then close the paper

4. Open Paper 4 add it to the foreground pattern 45 angle, 50 scale click okay now go down to the BG Clover go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the clover into the marching ants of the new raster layer once done go to Selections>Select none close the paper

5. Add this solid green color #76c032 go to the clovers elements all of them go to Selections>Select all>Float go to Layers>Add new raster layer click on the paint can and paint the green into the marching ants then go to blend change to overlay then go to Selections>Select None do it to all the clovers 

6. Open Paper 9 go to your foreground pattern 45 angle, 50 scale click okay now go down to the template C2 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the clover paper into the marching ants (keep the marching ants going) go to your 3d Effects>Drop Shadow of 2 2 50 2 black click okay then again at -2 -2 50 2 black click okay then go to Selections>Select None close the paper

7. Go to the WA go to Layers>Duplicate then go to Image>Negative then with your move tool move the white word art over a little giving 3d view look 

8. Open Paper 6 add it to your foreground pattern 0 angle, 100 scale click okay now go down to the white template T2 go to Selections>Select all>Float go to Layers>Add new raster layer click on the paint can and paint the pink gradient paper into the marching ants (keep the marching ants going) go to your 3d Effects>Drop Shadow of -2 -2 50 2 black click okay then again at 2 2 50 2 black click okay then go your Adjust>Hue and Saturation with the following setting below

Hue 144 and Saturation 129 click okay then go to Selections>Select None close the paper

9. Locate the Rainbow go to Image>Resize 500 width pixel click okay then go to blue paper go to Selections>Select all>Float now go to the Rainbow go to Edit>Copy then go to the image go to Edit>Paste into new raster layer with your move tool adjust the rainbow into the blue paper once in place go to Selections>Select None

10. Open Mushroom Home 1 go to Image>Resize 45% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the mushroom home down on the bottom of the frame (only see apart of it in the tag above)

11. Find Joan go to Image>Resize 350 width pixels click okay now go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place her down on the lower of the frame left side as shown above

12. Open Grass 1 go to Image>Resize 55% then go to Edit>Copy now down beneath the mushroom home go to Edit>Paste into new raster layer with your move tool move it down beneath Joan 

13. Open St Patty Mouse 2 go to Image>Mirror then go to Image>Resize 25% now go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the mouse down by the circle with her boots as shown above 

14.Open Bow 5 go to Image>Resize 25% then go to Edit>Copy now go to the top of image layers go to Edit>Paste into new raster layer with your move tool place the bow on the circle as shown above

15. Go to Layers>Merge>Merge Visible

16. Add copyright as shown below 

change tag by your name not mine

17. Add your name if you like I did the following below

Font Anime

Color #ffffff

18. Go Layers>Merge>Merge Visible 

19. Go to File save as PNG Format 

This completes this tutorial thank your for purchasing the items thanks for stopping by look for other tutorials with this kit under St Patrick designs 

Hugs Sunshine

written March 7th, 2026

Green Attitude Tutorial

 

Green Attitude Tutorial 

 You need to purchase or download the items below

St Patrick Kit HERE (pay)

Tag Template HERE (free) 

1. Open the tag template go to Windows>Duplicate close the original out then go to CC layer right click your mouse click delete remove the copyright. PSP Image will open between psp x7 to 23 if you can't open build by the png templates

2. Open Paper 3 go to Foreground pattern 45 angle, 50 scale click okay then go to the following templates below

T1, C1, C3 

Go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the clover paper into the marching ants on the new raster layer go to Selections>Select None close the paper

3. Open Paper 4 same setting as before go down to the BG Clover go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint clover paper into the 3 green clover templates then go to Selections>Select None close the paper

4. Open Paper 8 add it foreground 0 angle, 100 scales color the templates below

T2, C2, C4 

Do step 2 again this time when have marching ants go to 3d Effects>Drop Shadow 2 2 50 2 black click okay then again at  -2 -2 50 2 black click okay 

5. Go to the WA go to Image>Negative turn it white then go to your 3d Effects>Drop Shadow of 0 0 70 25 black click okay (give depth)

6. Add this lite green #97d033 into the foreground colors then go to each clover go to Selections>Select all>Float then go to Layers>Add new raster layer click on the  paint can and paint the color then go to the blend change to overlay 

7. Open Leprechaun 4 go to Edit>Copy now go down the green square paper go to Edit>Paste into new raster layer adjust her as you want go to the green paper go to Selections>Select all>Float then go to Selections>Invert go to Leprechaun of Cookie go to Edit>Cut then go to Selections>Select None go back to Leprechaun of Cookie go to blend change it to Luminance (L) 

8. Open Leprechaun 3 go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place her on the right side of the frame (she will fit right into place)

9. Open Mushroom Home 1 go to Image>Resize 35% go down beneath Leprechaun 3 add it into place it line up with the clover 

10. Open Mushroom 1 close of  Leprechaun 3 copy mushroom when add it line up with the right bottom frame once in place re open Cookie

11. Open Grass 1 go to Image>Resize 70% add it down beneath the mushroom elements 

12. Open Mouse 4 go to Image>Resize 35% go top image add the mouse left side of the grass as shown above

13. Open Doodle go down beneath the mouse add it move a little over to the right as shown above

14. Open Clover Puppy 1 go to Image>Resize 25% go to the top add him down in front of Cookie

15. Open Cupcake 2 go to Image>Resize 20% now go to the top image layer add it down in front of Cookie as shown above

16. Open Bow 5 (or your choice) go to Image>Resize 25% now add the bow on top of the template top circle then go to Layers>Duplicate move the 2nd bow bottom circle then go to your mouse move it up to the top of the bow 

17. Open Doodle again go down the green square paper go add it to the background once place top go to Layers>duplicate 2 times then move both doodle over as shown above 

18. Add copyright as shown below 

add tag by your name 

19. Add your name if you wish I use the following below

Font Autography

Color #f2de82

20. Go to Layers>Merge>Merge Visible 

21. Go to File save as PNG Format 

This completes this tutorial thank you for purchasing the kit look for other tutorials with this kit under St Patrick's tuts may you enjoy your stay 

Hugs Sunshine

written March 6th, 2026 

2. 

Leprechaun Bad Girls Tutorial

 

Leprechaun Bad Girls Tutorial

You need to purchase or download the items below

St Patrick Kit HERE (pay)

Tag Template HERE (download)

Tube Alice HERE (pay) by Goldwasser

1. Open the tag template go to Windows>Duplicate delete the copyright if you can not open the psp image you can build it together by the templates it does open between psp x7 and 23

2. Open Alice Tubes of the following 3, 4, 5 

 Take 5 go to Image>Resize 550 height click okay 

3. Go to the white square template middle side go to Selections>Select all>Float go to the Alice 5 go to Edit>Copy now go to Edit>Paste into new raster layer with your move tool place her head into the white template once in place go to Selections>Invert high light Alice 5 go to Edit>Cut then go to Selections>Select None. You can close this tube we done using her

4. Go to Alice 3 make her size 550 height go to Image>Mirror then add her to the white template left side as you did in step 3 then close her out we done using her and Set 4 aside we will add her at the end of the tutorial 

5. Open Paper 4 add it to your foreground pattern 45 angle, 50 scale click okay now go to to the following templates below 

BG Clover, O1, T1 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the clover paper into the new raster layer of the marching ants to each template then go to Selections>Select None close this paper out we done using it 

6. Open Paper 3 add it to your foreground pattern 45 angle, 50 scale click okay then go down to the line bars go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint clover paper into the marching ants of both lines once done go to Selections>Select None close this paper out 

7. Open Paper 7 add it to your foreground pattern 0 angle, 50 scale click okay now go down to the O2 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the green strip paper into the marching ants keep the marching ants going go to 3d Effects>Drop Shadow 2 2 50 2 black click okay then again at -2 -2 50 2 black click okay then go to Selections>Select None. then you can close the paper

8. Open Paper 8 go to foreground 0 angle, 100 scale click okay now go to F1,2,3 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the green gradient paper into the marching ants then go to your same drop shadow as before to all 3 frames 

9. Add this solid green #184c04 into the foreground colors go to Clover 1 go to Selections>Select all>Float then go to Layers>Add new raster layer click on the paint can and paint the clover then go to blend change to overlay 

10. Add this gold #f2de82 into foreground color go to Clover 2 do step 9 again but with the gold color 

11. Re open Alice 4 go to Image>Resize height pixel 550 click okay then again by Image>Resize 90% go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place her on top of the template as shown above once in place go to your 3d Effects>Drop Shadow of 0 0 60 25 black click okay 

12. Open Candy bag 1 (or 2) I use 1 go to Image>Resize 25% then again at 70% then go to Edit>Copy then go to the top image layers go to Edit>Paste into new raster layer with your move tool place the candy bag on the left side of her as shown above

13. Open Harp 2 (or 1) I use 2 go to Image>Resize 60% then go to Edit>Copy then go down beneath Alice 4 go to Edit>Paste into new raster layer with your move tool place the harp on the right side 

14. Open Clover Puppy 3 (or use 1,2) Go to Image>Resize 25% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the puppy on the right side (hide the bottom of the harp)

15. Open Irish pot 2 go to Image>Resize 25% go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place the pot of gold on the right side of her

16. Open St Mouse 1 go to Image>Resize 25% then add the mouse to the left side of the pot

17. Open St Patty Mouse 1 go to Image>Resize 25% then add the mouse go the right side of the pot 

18. Open Coins 1 go to Image>Resize 25% then go beneath the St Patty mouse add the coins move them down below the mouse feet and next pot of gold

19. Open Grass 1 go to Image>resize 70% then go to Edit>Copy now go down below harp elements go to Edit>Paste into new raster layer with your move tool place the grass down beneath the elements on the left side once done go to Layers>Duplicate move the duplicate grass on the elements on the right side an move it down a little

20. Go up to the WA go to Layers>Duplicate then go to Image>Negative turn it white then with your move tool move it a little over to the right side 

21. Add the copyright below 

Add TA with your name not mine

22. Add your name if you wish I use the following below

Font Anime

Color black then I duplicate go Image>Negative turn it white and move it over gave it 3d view look 

23. Go to Layers>Merge>Merge Visible 

24. Go to File save as PNG Format this completes this tutorial look for other tutorials to come with this kit thanks for purchasing the items may you have a Happy St Paddy day 

Hugs Sunshine

written March 6th, 2026