PTU Pumpkin Spice and Everything Nice Tutorial

You need to buy the following below 

Autumn Days Kit HERE

Frame Clusters HERE

Background provide is PU only for CU buy HERE 

Cookie Pumpkin Floral HERE (other poses optional) 

1. Go to File new size 800 x 800 transparent image 

2. Open Frame Cluster 3 go to Edit>Copy now goes to transparent image go to Edit>Paste into new raster layer with your move tool move it a little up 

3. Open the grass go to Edit>Copy now goes down beneath the frame go to Edit>Paste into new raster layer with your move tool slide the grass out in front of the pumpkins

4. Open Bench 1 go to Image>Resize 75% then go to Edit>Copy now goes to the top image layers go to Edit>Paste into new raster layer with your move tool move the bench down on the grass 

5. Open Leaves 2 go to Image>Resize two times at 80% then go to Edit>Copy now goes to the top image layers go to Edit>Paste into new rasterlayer with your move tool place the leaves center of the bench it will fall into place as shown above 

6. Open the word art Pumpkin Spice and Everything Nice go to Image>Resize 70% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place it down on the right side a little on the grass and the transparent image as shown above

7. Open the 3 pies go to Image>Resize 25% then go to Edit>Copy (3 times do this) go to top image layers go to Edit>Paste into new raster layer (do this 3 times) then with your move tool move each pie on the bench all 3 pies sit on the bench 

8. Open Cookie AD1 go to Image>Resize 55% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place Cookie on the left side as shown above once in place take your push tool push up on the right boot a little on the left boot

9. Open the Background that in the tut folder go to Edit>Copy now go down beneath the frame cluster go to Edit>Paste into new raster layer with your move tool adjust the background the way you want or the way I have it on the tag above once in place take your eraser and erase the background that is outside of the frame 

10. Open Cute Owl go to Image>Resize 25% then go to Edit>Copy now go down to the background go to Edit>Paste into new raster layer with your move tool place the owl on the left side of the line background road once in place take your push button and push it a little in front of the broom 

11. Open the Frog go to Image>Resize 25% then go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place the frog in front of the bench on the right side then go to Layers>Duplicate move the second frog in front of the bench and hide Cookie right boot a little as shown above 

12. Open Crow Bird go to Image>Resize 25% then go to Edit>Copy now goes to the top image layers go to Edit>Paste into new raster layer with your move tool move the crow on top of the pumpkin as if he getting ready eat once of the pumpkins lol 

13. Add the copyright 

 tag by your name (shows whom made it) 

14. Go to Layers>Merge>Merge Visible 

15. Move the tag a little down 

16. Crop the tag out of the extra transparent image 

17. Add your name if you wish 

18. Go to Layers>Merge>Merge Visible 

19. Go to File save as PNG Format this completes this tutorial 

Thanks for purchasing the designs look for all tutorials for this scrap kit under Autumn designs thanks for stopping by have a great day  

Hugs Sunshine 

written Aug 30th, 2026 

PTU Pumpkin Patch Frame Cluster Tutorial

 You need to purchase the following below 

Autumn Days Kit HERE

Frame Clusters HERE

Tube Jackie by (c)Goldwasser HERE

Background provide PU only use CU must buy HERE 

1. Go to File new size 800 x 800 transparent image (we crop later)

2. Open the Frame cluster 4 go to Edit>Copy then go to your transparent image go to Edit>Paste into new raster layer with yourmove tool move inch up 

3. Open Jackie design her as I did above or your way go to Layers>Merge>Merge Visible then go to Edit>Copy then go to Edit>Paste into new Image then close Jackie out click no so it goes back to the original settings then go to the image of Jackie go to Image>Resize height 450 pixels click okay then go to Image>Mirror then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place it on the frame cluster on the right side 

4. Go into the tutorial folder and open the background I provide go to Edit>Copy then goes down to the transparent image go to Edit>Paste into new raster layer with your move tool move the background up a little it will fit into the frame 

5. Open Leaves 2 go to Edit>Copy now go down to the background go to Edit>Paste into new raster layer with your move tool move the leaves a little over to the right side once in place go to Layers>Duplicate then move the duplicate above the frame cluster and leave as is (see above)

6. Open Pumpkin Patch 2 go to Image>Resize 45% then go to Edit>Copy now go down to the leaves beneath the frame cluster go to Edit>Paste into new raster layer with your move tool adjust on the right side behind Jackie a little then go to Layers>Duplicate, move the duplicate above the frame cluster adjust a little behind Jackie (see above) then go to the pumpkin patch 2 under neath the frame cluster go to Layers>Duplicate go to Image>Mirror adjust on the left side behind the frame cluster then go to Layers>Duplicate move it above the frame and adjust the left pumpkin patch down a little on the frame cluster (see above) 

7. Open Crow Bird go to Image>Resize 25% then go to Edit>Copy now go down beneath Jackie go to Edit>Paste into new raster layer with your move tool place the crow on the right pumpkin (hide the stem) then go to Layers>Duplicate move the duplicate crow on the other pumpkin on the left side (keep the element open) 

8. Go to the element go to Image>Mirror then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool move the crow on top of the sign of the Pumpkin Patch as shown above 

9. Open Frog to Image>Resize 35% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the frog on the left side as shown above

10. Open the Cute Owl go to Image>Resize 35% then go to Edit>Copy now goes to the top image layers go to Edit>Paste into new raster layer

with your move tool place the owl on the pumpkin patch left side as shown above (the left stem will hide behind the owl broom and the right stem show a little bit on the right side as shown above)

11. Open Ladybug 2 go to Image>Mirror then go to Image>Resize 20% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool move the orange ladybug on top of the pumpkin patch on the sign then once in place go to Layers>Duplicate with your move tool move the duplicate down on the lower pumpkin left side 

12. Open Ladybug 1 go to Image>Flip Vertical then go to Image>Resize 20% then go to Edit>Copy then goes to the top image layers go to Edit>Paste into new raster layer with your move tool place the red ladybug down on the pumpkin patch on the right side as shown above 

13. Go to Layers>Merge>Merge Visible

14. Add Copyright 

© Goldwasser
www.goldwasser.art

 

 TA _ Your name (shows whom made it) 

15. Add your name 

16. Go to Layers>Merge>Merge Visible 

17. Crop the extra transparent image

18. Go to File save as PNG Format this complete this tutorial 

Thanks for purchasing the designs to do this tutorial you can view other tutorials for this scrap kit under the Autumn designs there is 10 tutorials in total for this scrap kit design I create 

Also, there are 4 tutorials to the frame clusters also under Autumn for this scrap kit and the frame clusters hugs xx 

Hugs Sunshine 

written Sept 7th, 2026 

PTU Pumpkin Patch Tutorial

You need to purchase the items below 

Autumn Days Kit HERE

Gumdrop Poses buy HERE (optional)

1. Go to File new size 700 x 700 transparent image 

2. Open Pumpkin Patch element go to Edit>Copy then go the transparent image go to Edit>Paste into new raster layer with your move tool 

move the pumpkin patch down a little 

3. Open Autumn Vine 3 go to Edit>Copy now go to the image layers go to Edit>Paste into new raster layer then with your move tool place the 

floral vine down beneath the pumpkin patch adjust both elements the stem will hide behind the pumpkin patch 

4. Open the bridge go to Edit>Copy now go down beneath the pumpkin patch go to Edit>Paste into new raster layer with your move tool adjust

the bridge half way down behind the pumpkin patch the sides will sit out a little don't worry soon we will cover it 

5. Open the Bucket of Pumpkins 2 go to Image>Resize 45% then go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place the pumpkin bucket down on the left side as shown above it will hide the bridge on the left side 

6. Open Gumdrop Sally 3 go to Image>Resize 45% now go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place her on the right side once in place like it shows above take a small eraser go to the bridge and erase the bridge behind her arm right side 

7. Open Leaves 1 go to Edit>Copy now go above the pumpkin patch below the bucket of pumpkins go to Edit>Paste into new raster layer then move the leaves down beneath the element then go to Layers>Duplicate move the duplicate leaves beneath the pumpkin patch then take your small eraser and erase the sunflower area towards Sally knees and the bucket pumpkins that way the sunflower and the leaves attach to the element comes out and over the leaves 

8. Open the frog go to Image>Resize 20% then go to Edit>Copy now go to the top of the image layers go to Edit>Paste into new raster layer with your move tool place the frog a little in front of Sally knees left side (shown above) then take the frog go to Layers>Duplicate with your move tool move the 2nd frog on top of the bucket of pumpkins 

9. Open Squirrel 1 or 2 I use 1 go to Image>Resize 25% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer lay the squirrel on top of the pumpkin patch in the center of the bridge as shown above 

10. Open the crow bird go to Image>Resize 25% then go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place the crow on the right side of the bridge (as shown above) then once in place go to Layers>Duplicate adjust the left side crow on the bridge 

11. Open Pumpkin Patch word art go to Image>Resize 65% then go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place the word art on the upper right side of the transparent line up with the floral vine as shown above

12. Add my copyright to the tag image 

tag by your name (shows whom made it) 

13. Add your name into the wooden board on the pumpkin patch 

14. Go to top of your image layers go to Layers>Merge>Merge Visible 

15. Go to File save as an PNG Format this completes this tutorial 

Thank you for purchasing the designs and look for the other tutorials to this kit under Autumn thanks for stopping by have an amazing day 

Hugs Sunshine 

written Aug 29th, 2026 

PTU I Never meet a Pumpkin I didn't Like Tutorial

You need to buy the following items below 

Autumn Days Kit HERE

Other pose of Cookie Pumpkin Floral HERE 

1. Go to File new size 700 x 700 transparent image 

2. Open Wagon of Pumpkins I use 2 (your choice) go to Edit>Copy then go to the transparent image go to Edit>Paste into new raster layer with your move tool move it a little down but not much see the sample tag above 

3. Open Basket of Pumpkins 1 or 2 I use 1 go to Image>Resize 45% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place it down on the left side it will hide the left tire 

4. Open Log 1 go to Image>Resize 55% then go to Edit>Copy now go down beneath the pumpkin basket go to Edit>Paste into new raster layer with your move tool place the log in the middle of the wagon a little slide behind the bucket of the pumpkins 

5. Open Basket of Apples 1 or 2 I use 1 go to Image>Resize 45% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the apples basket on the right side it will hide the right tire once in place take your small eraser go down to the wagon and eraser the bar on the right side of the wagon 

6. Open Autumn Leaves corner go to Image>Resize 65% then go Edit>Copy then go to the top of the image layers go to Edit>Paste into new raster layer with your move tool place the leaves corner on the left side as shown above (a little go on the wagon and basket of pumpkins) keep the element open go to step 7

7. Go to the element go to Image>Mirror then Image>Resize 45% then go to Edit>Copy now go down to the wagon element layer go to Edit>Paste into new raster layer with your move tool place the right-side leave corner line up a little with the left corner and the wagon on the right side as shown above 

8. Open the Word Art I Never Meet a Pumpkin I didn't Like go to Image>Resize 60% now go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool careful grab the word art slide it up into the transparent image between your two leave corners the L in Like will line up with the red leaf as shown above 

9. Open Cute Owl go to Image>Resize 25% now go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer move the owl on top of the log as shown above 

10. Open the Crow Bird go to Image>Mirror then go to Image>Resize 25% then go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place the crow on top of the wagon left side as shown above 

11. Open the Birds go to Image>Resize 45% now go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the birds on top of the right side of the corner leaves once in place go down to your right corner leaves go to Layers>Duplicate move the duplicate all the way to the top then line the branch with the orange leave then take your eraser and erase the leave corner on the birds down the right side we only want to hide the end of the branch on the left side with the orange leaf as shown above (this is optional) 

12. Open Cookie AD3 go to Image>Mirror go to Image>Resize 45% then again at 90% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place her in front of the basket of apples once in place go to the basket of apples and erase the handle on the basket 

13. Open the grass go to Edit>Copy now go down beneath the wagon go to Edit>Paste into new raster layer with your move tool slide the grass down beneath the elements as if Cookie laying in the grass in front of the wagon and fruit as shown above 

14. Open Fall leaves 2 go to Edit>Copy go to your image layers go Edit>Paste into new raster layer slide the leaves down beneath Cookie right side little will show above the grass 

15. Open Leaves 3 go to Image>Resize 80% then go to Edit>Copy go to your image layers go to Edit>Paste into new raster layer with your move tool careful grab the leaves move it down covering the grass as shown above make it a pretty autumn grass design pretty cool huh 

16. Open Cup 1 go to Image>Resize 20% then go to Edit>Copy now go down beneath Cookie layer go to Edit>Paste into new raster layer with your move tool place the pumpkin cup by her hand as shown above 

17. Open Cupcake 4 (or your choice) go to Image>Resize 20% then go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place the cupcake down by her hand between her thumb as shown above 

18. Open the frog to Image>Resize 25% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the frog in front of the pumpkin basket as shown above 

19. Open Scarecrow 1 or 2 I use 1 go to Image>Resize 45% then go to Edit>Copy go above the pumpkin basket place it on the left side then go to Layers>Duplicate move the duplicate down beneath the wagon then take your eraser on the top scarecrow above the wagon a simply erase a little of the stick on the pumpkin basket then move the crow a little down as shown above

20. Add copyright as shown below 

tag by your name (shows whom made it) 

21. Add your name if you wish 

22. Go to Layers>Merge>Merge Visible 

23. Go to File save as PNG Format this completes this tutorial 

Thanks for purchasing the kit and look for other tutorials with this kit under Autumn thanks for stopping by may you enjoy your stay  

Hugs Sunshine 

written Aug 28th, 2026 

PTU I'm so Cute You'll Fall Me Tutorial

You need to buy the following below 

Autumn Days Kit HERE

Frame Clusters HERE

Tube Brooke by(c)Goldwasser HERE 

Background provide PU only buy HERE CU use 

1. Go to File new size 700 x 700 transparent image 

2. Open Frame Cluster 2 go to Edit>Copy then goes to the transparent image go to Edit>Paste into new raster layer

3. Open the background provide in the tut folder it is for PU use only no CU is allowed then go to Edit>Copy goes down beneath the frame cluster go to Edit>Paste into new raster layer take your eraser and erase the background outside of the frame cluster

4. Open Owl go to Image>Resize 35% then go to Edit>Copy now goes above the frame Cluster go to Edit>Paste into new raster layer with your move tool place the owl on the right side of the mushroom 

5. Open Brooke go to Image>Resize height 500 pixels click okay then go to Image>Mirror then go to Edit>Paste into new raster layer move it beneath the owl then take your erase and tap it behind the owl on the left side it erase a little bit of her foot sock 

6. Open the Log 1 go to Image>Resize 35% then go to Edit>Copy now goes down beneath tube go to Edit>Paste into new raster layer with your move tool slide the log behind her a little towards the right side

7. Open the frog to Image>Resize 25% then go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place the frog in front of her hand on the right side 

8. Open the word art I'm so Cute You'll Fall Me go to Image>Resize 65% then go to Edit>Copy go to the top image layer go to Edit>Paste into new raster layer with your move tool careful grab the word art and move it down on the right side of the grass line up with the leaf on the tube of Brooke 

9. Open leaves 2 go to Image>Resize 80% then go to Image>Flip it upside down go to Edit>Copy now goes down to the frame cluster

go to Edit>Paste into new raster layer with your move tool slide the leaves down on the grass of the frame cluster once in place take your eraser and erase the leaves on the left side of the mushroom and the grass as shown above 

10. Add copyright 

© Goldwasser
www.goldwasser.art

TA_your name (shows whom made it) 

11. Add your name if you wish 

12. Go to the top of your image layers go to Layers>Merge>Merge Visible 

13. Go to File save it as an PNG image this completes the tutorial thanks for purchasing the designs for this PTU tutorial

look for other tutorials with this kit and frame clusters thanks for stopping by 

Hugs Sunshine

written Aug 29th, 2019 

PTU Every Year I Fall 4 Pumpkins Bonfires and Smores Apples Autumn Leaves Tutorial

You need to buy the following below 

Autumn Days Kit HERE

Tube Francine by(c)Goldwasser HERE

Background Provide PU buy HERE if use CU 

Frame is PU if you want buy CU HERE 

1. Go to File new size 700 x 700 transparent image 

2. Open the word art Every Year I Fall 4 Pumpkin word art go to Image>Resize 700 height pixels click okay then go to Edit>Copy then go to Edit>Paste into new raster layer of the transparent image 

3. Open the Circle Frame in the tutorial kit for this tutorial go to Edit>Copy then goes to image layer Go to Edit>Paste into new raster layer the circle will fall into place 

4. Open the background I provide in the tut 

5. Go to your magic wand and click inside the brown round frame I include go to Selections>Modify>Expand 10 click okay then go down beneath the frame (keep the marching ants going go to the next step)

6. Go to the background I provide go to Edit>Copy then go to image layers beneath the frame go to Edit>Paste into Selection then go to Selections Select None

7. Go into the Kit open the Vine of your choice I use 2 go to Image>Resize 55% then go to Edit>Copy then go to the top of the image 

layers go to Edit>Paste into new raster layer with your move tool place the vine on the right-side line up with the round frame then go to Layers>Duplicate, Image>Mirror adjust on the left side 

8. Open Floral Vine 3 go to Image>Resize 45% then go to Edit>Copy then go to image layers go to Edit>Paste into new raster layer with your move tool place it on top of the vine you use line into the frame edge then once in place go to Layers>Duplicate then go to Image>Mirror and adjust it on the right side 

9. Open the Leaves 3 go to Image>Resize 80% then go to Edit>Paste into the new raster layer with your move tool place the leaves down on the bottom of the frame

10. Open the Pumpkin Patch 2 go to Image>Resize 45% then go to Edit>Copy now goes to your image layers go to Edit>Paste into new raster layer lay it down on the right side (we will adjust it in a moment) 

11. Open the PNG tube of Francine 3 go to Image>Resize 45% go to Edit>Copy then goes to the top of your image layers go to Edit>Paste into new raster layer with your move tool move her down on top of the leaves 

12. Take your eraser and erase the leaves behind her boots and a little underneath her so the word arts shown 

13. Now adjust the pumpkin on the right side behind her then take your eraser an erase a little of the pumpkin leaves on the word art it is optional if you erase the elements like I did see above tag 

14. Add copyright as shown below 

TA_your name (shows whom made it)

15. Add your name if you wish 

16. Go to Layers>Merge>Merge Visible 

17. Go to File save as PNG Format this completes this tutorial the background and the frame in the tut folder are for PU use only 

if you like the round circle go to my Frame Clusters to find it or the link I provide on the store for this tut thanks for purchasing my kit and her beautiful tube to do this tutorial 

Hugs Sunshine 

written Aug 29th, 2026 

PTU Autumn Days Tutorial

Need buy the followings below 

Autumn Days Kit HERE

Cookie Pumpkin Floral HERE want different pose 

1. Go to File new size 800 x 800 transparent image 

2. Open Frame 3 go to Image>Free Rotate>Rotate Left 45 degrees click okay go to Edit>Copy now go to the transparent image go to Edit>Paste into new raster layer move up a little 

3. Open Frame 2 go to Image>Free Rotate>Left 25 degrees click okay then go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer lay it on top move it towards left and down a little 

4. Open Paper 3 add it to your foreground pattern 0 angle, 50 scale click okay now go to your magic wand click inside frame 3 then go to Selections>Modify>Expand 10 click okay then go to Layers>Add new raster layer move it beneath Frame 3 then click on the paint can and paint the paper into the marching ants on the new raster layer once done go to Selections>Select None (keep the paper open)

5. Do step 4 with the same paper same way did frame 3 but with frame 2 now close the paper out we done using it both frames are now connect together 

6. Open Log 1 go to Edit>Copy now goes to the top image layers go to Edit>Paste into new raster layer with your move tool place the log down on the bottom frame left side as shown above 

7. Open Pumpkin Patch 1 go to Edit>Copy now goes down beneath the log go to Edit>Paste into new raster layer with your move tool place the pumpkin patch towards the left make the center sunflower line up with the sunflower on the log as I did above 

8. Open Birds go to Edit>Copy now goes to top image layers go to Edit>Paste into new raster layer with your move tool place the birds on top of the frame 2 with frame 3 as shown above 

9. Open Autumn Vine 3 go to Edit>Copy now go down to Frame 2 go to Edit>Paste into new raster layer with your move tool place it on the left side a little down underneath the log, but not too much then go to Layers>Duplicate move the duplicate above the birds then take your eraser and erase the floral vine on the log, and the birds only a little on the branch left side but not much we want to cover the end of the branch as shown above 

10. Open Cute Owl go to Image>Resize 45% then go to Edit>Copy then goes to the top image layers go to Edit>Paste into new raster layer with your move tool place the owl on the log left side as if owl is talking to the birds lol 

11. Open Frog go to Image>Resize 25% then go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place the frog on top of the pumpkin on the log then once in place go to Layers>Duplicate move the second frog on top of the second long place his hands between the leaf on the log as shown above 

12. Open Cookie AD1 go to Image>Resize 65% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place her on the right side of the log have her left hand touch the log a little it will fit into place as shown above 

13. Open the Grass go to Edit>Copy goes down to the Autumn Vine go to Edit>Paste into new raster layer with your move tool slide the grass down underneath Cookie 

14. Open Leaves 3 go to Image>Resize 80% then go to Edit>Copy now goes down to your grass go to Edit>Paste into new raster layer with your move tool place the autumn leaves down where the grass is but leave a little bit of the green grass as shown above 

15. Take your push button a push the leaves on the left boot (optional) 

16. Open Leaves 2 go to Edit>Copy now go down beneath the log go to Edit>Paste into new raster layer with your move tool slide a little down want to see it in the frame 2 behind the frog and Cookie once in place erase the leaves on the right side of Cookie 

17. Open the word art Autumn Days go to Image>Resize 65% then go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place it on the right side have the Days line up with the green branch leave as shown above 

18. Open Mushroom 1 go to Image>Resize 45% then go to Edit>Copy now go down beneath Cookie go to Edit>Paste into new raster layer withyour move tool place the mushroom behind cookie line up with her right boot as shown above then go to Layers>Duplicate, Image>Mirror and adjust the left side mushroom 

19. Go to the grass go to Layers>Duplicate move it little careful over to the left side line up with the mushroom a little 

20. Add copyright below 

 Tag by your name (shows whom made it)

21. Add your name if you wish 

22. Go to Layers>Merge>Merge Visible 

23. Go to File save as PNG Format this complete this tutorial look for other tutorials for the Autumn Days kit there is 7-8 tutorials thank you for purchasing thank you for stopping by look for more tutorials to come soon have an amazing day 

Hugs Sunshine

written Aug 30th, 2026 

Autumn the Colors of Fall PTU Tutorial

Need to buy the following below

Autumn Days Kit HERE

Other posers of Cookie theme HERE 

1. Go to File new size 800 x 800 transparent image 

2. Open Fence 2 go to Image>Resize weight 700 pixels click okay then go to Edit>Copy now goes to the transparent image go to Edit>Paste into new raster layer with your move tool move it down a little 

3. Open grass go to Edit>Copy now go down beneath the fence go to Edit>Paste into new raster layer with your move tool move the grass down little in the front of the fence part in the back of the fence right side first then go to Layers>Duplicate with your move tool move the duplicate over to the left a little they will overlap with each other making the center grass view 

4. Open Leaves 1 go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool line up between both flowers on the fence with the grass as shown above

5. Open Tree 2 go to Image>Resize 55% then go to Edit>Copy now go underneath the fence again go to Edit>Paste into new raster layer with your move tool place the tree on the grass behind the fence right side once in place go to Layers>Duplicate Image>Mirror and the second tree line up on the left side behind the fence 

6. Open Tree 1 go to Image>Resize 45% then go to Edit>Copy now go above both your tree 2 go to Edit>Paste into new raster layer then move the autumn tree into the center between the other two trees as shown above

7. Open Flower Swing 2 go to Image>Resize 55% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place it on the right side as shown on the tag above once in place take your push tool and push up a little on the stem of the flower swing with the leaves 

8. Open Flower Lamp 2 (or your choice) go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place it on the left side once in place take your push tool and push the leaves a little up on the flower lamp as shown above the light shine off the trees 

9. Open Cookie AD2 go to Image>Resize 35% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place her on the swing make her left thumb-hand line up with the swing then reduce cookie a little take your eraser size small size tab the swing down on her hand then put Cookie back at 100 on the layers tab the swing a little more on the hand making her hold the swing 

10. Open Cookie AD 1 go to Image>Resize 45% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer move her in front a little to the right side by the flower lamp once in place take your push tool and push the leaves on her left boot and a little on the right one as if they are sisters twins lol waiting for her turn to swing lol 

11. Open Frog go to Image>Resize 25% then go to Edit>Copy go to the top image layers go to Edit>Paste into new raster layer with your move tool place the frog on top of the flower lamp as shown above then go to Layers>Duplicate move the duplicate frog on the right side up by the flowers on the fence 

12. Open Pumpkin Patch 2 go to Image>Resize 35% then go to Edit>Copy now go down to the fence layer go to Edit>Paste into new raster layer with your move tool move the pumpkin down by the fence between the two girls as shown above 

13. Open Birds go to Image>Resize 55% then go to Edit>Copy now go down to the flower swing go to Edit>Paste into new raster layer with your move tool place the birds with the branch a little on the flower swing a little on the green tree on the right side once in place go to Layers>Duplicate move the duplicate birds branch beneath the flower swing now to the top bird that is above the flower swing with your eraser erase the end of the branch off the flower as shown above 

14. Open the word art Autumn the Colors of Fall go to Image>Resize 70% then go to Edit>Copy now go to the top image layers go to Edit>Paste into new raster layer with your move tool place the word art down on the bottom line the A with the brown leaf as I did above 

15. Add the copyright below 

 tag by your name (shows whom made it) 

16. Go to Layers>Merge>Merge Visible 

17. Move the tag down a little 

18. Crop the extra transparent off the tag 

19. Add your name if you wish 

20. Go to Layers>Merge>Merge Visible

21. Go to File save as a PNG Format this completes this tutorial thanks for stopping by look for my other tutorials to 

Autumn days kit under Autumn on the blog thanks for purchasing and for stopping by look new tutorials to come soon 

Hugs Sunshine 

written Aug 30th, 2026 

PTU Autumn Days Hayrides Tutorial

You need to buy the following below 

Autumn Days Kit HERE

Frame Clusters HERE

Tube Charlotte by (c)Goldwasser HERE

Also provide background for you buy HERE if you want to use it for CU otherwise one I provide is PU use only xx hugs xx 

1. Go to File new size 800 x 800 transparent image (we crop end of the tutorial)

2. Open Frame Clusters Open Frame 1 go to Edit>Copy now goes to your transparent image go to Edit>Paste into new raster layer with your move tool move a little to the top 

3. Open Charlotte close the snow layer, open the leaf left hand go to Layers>Merge>Merge Visible then go to Edit>Copy now go to Edit>Paste into new Image when you close the psp tube of her click no goes back to the original settings now go to the image we create go to Image>Mirror then go to Image>Resize height 450 pixels click okay now go to  Edit>Copy go over to your image we are create go above the frame cluster go to Edit>Paste into new raster layer with your move tool adjust Charlotte on the right side of the frame once adjust take your eraser and erase the  left on the left side (as shown above) 

4. Go to Charlotte go to 3d Effects>Drop Shadow 0 0 60 10 black click okay (gives her depth this is optional) 

5. Go into the tutorial folder and open the BG I create for this tutorial go to Edit>Copy go down to the transparent

image below the frame cluster go to Edit>Paste into new raster layer and adjust the background into the frame (it shows sit in but if not just adjust it) 

 6. Go into the Kit open Hay 2 go to Image>Resize 35% then go to Edit>Copy now go down to the background image go to Edit>Paste into new raster layer with your move tool move the hay a little behind Charlotte as shown above 

7. Open Birds go to Image>Resize 55% then go to Edit>Copy then go to the top image layers go to Edit>Paste into new raster layer with your move tool move the end of the branch to line up with the sign then take your eraser and tab

the end of the branch as I did above blend them together 

8. Open Log 1 go to Image>Resize 55% then go to Edit>Copy now go down above the hay go to Edit>Paste into new raster layer with your move tool place the log on the left side line up with the bench then adjust the hay a little over but not much (see above) 

9. Open Cute Owl go to Image>Resize 25% then go to Edit>Copy goes down to the log go to Edit>Paste into new raster 

layer with your move tool place the owl on the lower log as shown above 

10. Open Crow Bird go to Image>Resize 25% then go to Edit>Copy now goes down to the owl go to Edit>Paste into new

raster layer with your move tool place the crow on the right-side line up with the bench then go to Layers>Duplicate

then go to Image>Mirror then with your move tool move the crow to the top of the image layers then take your move 

tool move the duplicate crow bird on the sign as shown above or wherever you want on the sign 

11. Open the Frog go to Image>Resize 35% then go to Edit>Copy now go to the top image layers go to Edit>Paste in

new raster layer with your move tool adjusts the frog as shown above by the right pumpkin floral a little by her foot 

12. Add copyright 

 © Goldwasser

www.goldwasser.art

 TA_ Your name (shows whom made it) 

13. Add your name 

14. Go to Layers>Merge>Merge Visible 

15. Crop out of the extra transparent (optional)

16. Go to File save as PNG format this complete this tutorial look under Autumn for other tutorials to this kit and frame clusters thanks for purchasing the designs 

Hugs Sunshine

written Sept 7th, 2026